A cracked toilet cistern can cause water leakage, waste, and damage to your bathroom floor. If you notice a crack in your toilet cistern, you should repair it as soon as possible to avoid further problems. Fortunately, repairing a crack in a toilet cistern is not a difficult task and you can do it yourself with some basic tools and materials.
In this article, we will show you how to repair a crack in a toilet cistern in a few simple steps. You will need the following items:
Follow these steps to repair a crack in a toilet cistern:
Turn off the water supply to the toilet by closing the valve behind the toilet or under the sink. Flush the toilet to empty the cistern and use a sponge to soak up any remaining water.
Remove the lid of the cistern and set it aside. Use a screwdriver and a wrench to disconnect the water supply hose and the flush valve from the bottom of the cistern.
Lift the cistern off the toilet bowl and place it on a towel on a flat surface. Dry the cistern thoroughly with a hairdryer.
Open the porcelain repair kit and follow the instructions to mix the epoxy resin and the hardener. Apply a thin layer of the mixture over the crack with a paintbrush. Make sure to cover the entire crack and extend slightly beyond it.
Let the epoxy mixture dry for at least 24 hours or as directed by the manufacturer. Do not touch or move the cistern during this time.
After the epoxy mixture is dry, use a fine-grit sandpaper to smooth out any rough edges or excess material. Wipe off any dust with a damp cloth.
Reattach the cistern to the toilet bowl and reconnect the water supply hose and the flush valve. Turn on the water supply and test the toilet for any leaks.
Replace the lid of the cistern and enjoy your repaired toilet.
Congratulations! You have successfully repaired a crack in a toilet cistern. You have saved money and prevented water damage to your bathroom floor. You can also use this method to repair cracks in other porcelain items, such as sinks, bathtubs, or tiles.
If you have a crack in your toilet cistern that is too large or deep to repair with epoxy, you may need to replace the entire cistern. You can buy a new cistern online or at a hardware store. Make sure to choose one that matches the size and shape of your toilet bowl. You can follow the same steps as above to remove the old cistern and install the new one.
Alternatively, you can hire a professional plumber to repair or replace your cracked toilet cistern. A plumber can assess the extent of the damage and recommend the best solution for your situation. A plumber can also ensure that the repair or replacement is done correctly and safely. However, hiring a plumber can be more expensive and time-consuming than doing it yourself.
Whether you choose to repair or replace your cracked toilet cistern, you should act quickly to avoid further complications. A cracked toilet cistern can lead to water wastage, higher water bills, mold growth, and floor damage. By fixing the problem as soon as possible, you can save money and protect your bathroom from potential hazards. 06063cd7f5